1. Home
  2. Trucks For Sale
  3. Forklifts
  4. Caterpillar
  5. GP25N
  6. 2022

2022 Caterpillar GP25N High-Capacity Forklift - Lockport, NY

Stock# A12072

Detailed Specifications

Truck Type High-Capacity Forklift
Engine Model GK25E
Engine HP 61
Fuel Type Gasoline
Trans Type Automatic
Lift Capacity 5000
Fork Type Standard
Lifting Height 188"
Max Speed 11.5
Tire Type Pneumatic
Operator Position Seated Rider
Mast Type Triplex
Serial No. AT35A12072

Comments

The Cat GP25N is a 5,000 lb (2,500 kg) capacity, LP gas/gasoline-powered, internal combustion forklift with pneumatic tires, featuring a compact design, ergonomic cabin, and reliable GK25E engine for indoor/outdoor use, with common specs including a 24-inch load center, around 180-inch max lift height with standard masts, and ~88-inch turning radius.  
Key Specifications 
  • Capacity: 5,000 lbs (2,500 kg)
  • Power: LP Gas / Gasoline
  • Engine: GK25E (sometimes listed as GK21E or 4G64 in different variants)
  • Tires: Pneumatic
  • Load Center: 24 inches (500 mm)
  • Lift Height (Max): Varies by mast, around 180-188 inches (Triplex)
  • Mast Lowered Height: Approx. 83-84.5 inches
  • Overall Width: ~45.3 inches (single drive) or ~64.6 inches (dual drive)
  • Turning Radius (Outside): ~87.8 inches (2.23m)
  • Weight (Operating): ~7,990 lbs (3,620 kg)
Features
  • Operator Comfort: Ergonomic cabin, suspension seat, and ample floor space. 
  • Stability: Floating powertrain design lowers center of gravity for stability. 
  • Performance: Powerful hydraulics, helical gears for quiet operation. 
  • Versatility: Compact design suitable for narrow aisles; various optional attachments available (fork positioners, side shifters, etc.). 
Mast and Performance Details
  • Maximum Lift Height: The maximum lift height varies by mast option, with common configurations offering up to 131.5 in or 188 in (triple mast).
  • Tilt Range: The mast offers a tilt range of 6.0 degrees forward and 10.0 degrees backward.
  • Travel Speeds: It has a travel speed of 11.5 mph (18.5 km/h) without a load, and 10.6 mph (17 km/h) when loaded.
  • Lift/Lower Speeds: Lifting speed without load is approximately 128 fpm (0.65 m/s), while the lowering speed is 98.4 fpm (0.5 m/s) with a load.
  • Transmission: The forklift features a single-speed powershift automatic transmission. 
The Caterpillar GP25N forklift has a minimum fork spread (outer edge measurement) of approximately 8.7 inches (220 mm) and a maximum spread of 39.4 inches (1000 mm), depending on the exact carriage and any fitted attachments. 
Fork Spread Specifications
The fork spread refers to the distance between the outside edges of the forks. The range can vary slightly based on specific attachments or regional models, but general specifications indicate the following range:
  • Minimum Fork Spread (Outside): 8.7 inches (220 mm)
  • Maximum Fork Spread (Outside): 39.4 inches (1000 mm) 
Additional Fork Details
  • Standard Fork Dimensions: The standard forks themselves typically measure 1.6 inches (40 mm) thick by 3.9 inches (100 mm) wide by 42 inches (1070 mm) long.
  • Fork Carriage Width: The standard fork carriage width is typically 45.3 inches (1150 mm).
  • Adjustments: The distance between the forks is manually adjustable along the carriage to accommodate different pallet and load sizes, using the minimum and maximum ranges as a guide.

National Equipment Remarketers, LLC

6523 South Transit Road Suite 4
Lockport, NY 14094
(716) 706-4766 View Map Email Dealer